Ever opened your dishwasher expecting sparkly clean dishes and instead got hit with a smell like something crawled in there and quietly gave up? Yeah. Same.
Here’s the thing nobody tells you: the machine that washes your dishes needs washing too. Grease, old food, hard water gunk and that mystery funk all build up in the spots you never look at.
And then your βcleanβ glasses come out with little spots and a faint swamp vibe. Not cute.
But don’t panic β you don’t need a repair guy or a brand new dishwasher. You need about 30 minutes, a few things you probably already own, and this step-by-step.
By the end your dishwasher will smell fresh, run better, and actually earn its spot in your kitchen. Let’s get into it. π
What You’ll Need Before You Start
The Essentials
- Distilled white vinegar β your cheap, all-natural buildup buster. A big jug costs almost nothing. See Here
- Dish soap β a grease-cutter like Dawn does the heavy lifting on the filter. See Here
- Baking soda β for that final freshen-up cycle.
- A non-scratch sponge β I’m a loyal Scrub Daddy fan; it firms up in cold water and softens in warm, so it won’t trash your parts. See Here
The Nice-to-Haves
- Rubber gloves β trust me, the filter is not a bare-hands situation. See Here
- A long, skinny bottle brush β the only thing that reaches down into the filter housing. See Here
- A spray bottle β fill it with a vinegar-water mix for the interior. See Here
- A glass measuring cup β for the vinegar cycle later. See Here
Step 1: Pull Out the Removable Parts

Gloves on. Start by taking out everything that lifts or twists free β the bottom rack, the utensil basket, and most importantly the filter and spray arms.
Most filters sit in the center of the floor and twist out with a quarter turn. The spray arms usually pop off or unscrew. Set it all in the sink; we’ll clean these pieces by hand because that’s where the real grime hides.
Pro tip: Snap a quick phone photo before you remove anything. Future-you, standing there holding a spray arm with no idea which way it went, will be very grateful. π
Step 2: Attack the Filter First (It’s the Smell Culprit)

If your dishwasher smells and you only do one thing, do this. Pull the filter up to the light and you’ll probably see trapped food, grease and a layer of slime. That funk you’ve been smelling? Found it.
Run the filter under hot water to blast off the loose stuff. Then add a drop of dish soap to your sponge and scrub the mesh and plastic all over until the water runs clear.
For the filter housing β the hole it sits in β go in with your long brush and a little soapy water. It gets surprisingly nasty down there, so take your time.
Pro tip: Don’t use anything metal or abrasive on the mesh. One tear and the filter stops doing its job, and you’re buying a replacement. Soft sponge only.
Step 3: Clear Out the Spray Arm Jets

Those little holes in the spray arms are how water actually reaches your dishes. When they clog with hard water deposits and gunk, your dishes come out half-washed.
Soak the arms in warm soapy water for a few minutes, then poke each jet with a toothpick or a thin piece of wire to clear it. Rinse them out and give them a shake β you want water flowing freely through every hole.
Step 4: Wipe Down the Interior, Door and Seal

Now the inside. Mist the walls, floor and especially the door with your vinegar-water spray, then wipe everything down with your sponge.
Pay real attention to the rubber gasket around the door β that fold of rubber is a hideout for grime, old detergent and mold. For baked-on greasy spots, a grease-cutting spray like Dawn Powerwash makes it almost effortless. See Here
Pro tip: Fold the gasket back gently as you wipe so you catch the hidden crease. That’s usually where the worst of the smell is actually living.
Step 5: Don’t Skip the Detergent Dispenser and Door Edges
The detergent dispenser gets a crusty film over time, and the top edge of the door never touches water during a normal cycle β so it just collects drips and grime for years.
Wipe both with your damp soapy sponge. Tiny areas, big difference in how fresh the whole thing feels.
Step 6: Run a Hot Vinegar Cycle

Pop the filter and spray arms back in. Fill your glass measuring cup with about a cup of distilled white vinegar and stand it upright on the top rack.
Run the hottest, longest cycle your machine has, empty otherwise. The vinegar flushes through the whole system, cutting grease and dissolving hard water scale you can’t reach by hand.
Prefer a ready-made option? A dishwasher cleaning tablet made for the job β something like a Cascade or Affresh cleaner β works beautifully and takes zero measuring. See Here
Step 7: Finish With a Baking Soda Freshen-Up
This part is optional, but it’s the cherry on top. Sprinkle about a cup of baking soda across the bottom of the empty dishwasher and run a short hot cycle.
It deodorizes, brightens the interior, and leaves everything smelling clean instead of βclean-ish.β Your nose will notice.
Step 8: Reassemble and Admire Your Work
Double-check the filter is twisted back in and locked, and the spray arms spin freely. That’s it β you just did what most people never bother to, and your dishwasher is genuinely clean, not just rinsed.
Keep It Fresh: Easy Maintenance Habits

A deep clean is great, but a few small habits keep you from ever dealing with that swamp smell again:
- Scrape, don’t pre-rinse to death. Knock off big chunks, but let the detergent do its job β over-rinsing actually confuses many modern machines.
- Rinse the filter weekly. Thirty seconds under hot water stops buildup before it starts.
- Run hot tap water at the sink first. Do this right before a cycle so your dishwasher starts with hot water, not cold.
- Wipe the gasket every week or two. A quick swipe keeps mold from setting up camp.
- Leave the door cracked after a cycle. Letting it air out beats trapping moisture inside.
- Add a rinse aid. It fights spots and film, especially if your water is hard. See Here
When Your Dishwasher Needs More Than a Scrub
If you’ve done all this and still fight cloudy glasses and chalky film, your real enemy is probably hard water. Mineral-heavy water leaves deposits no amount of scrubbing fully beats.
A hard water booster like Lemi Shine, added to your regular cycles, dissolves that mineral film and brings the shine back. See Here
And if your machine is pushing 10-plus years, leaking, or leaving dishes dirty even after a full clean β it may genuinely be time to upgrade. Sometimes the kindest thing you can do is let the old workhorse retire. A newer energy-efficient model pays you back in water and electricity savings. See Here
Dishwasher Cleaning FAQ
How often should I deep clean my dishwasher?
A proper deep clean once a month is plenty for most homes. Rinse the filter weekly and wipe the gasket, and the monthly job stays quick and easy.
Can I just use bleach?
I’d skip it. Bleach can damage stainless steel interiors and rubber seals, and it reacts badly with other cleaners. Vinegar and baking soda are safer and work great.
Why does my dishwasher still smell after cleaning?
Nine times out of ten, it’s the filter or the gasket β the two spots people miss. Go back to Steps 2 and 4 and really get in there. The clog causing the smell is usually hiding in one of them.
Vinegar or a store-bought dishwasher cleaner β which is better?
Both work. Vinegar is cheap, natural and always on hand. A dedicated cleaner is more convenient and a little stronger on heavy scale. Honestly? Rotate between them and you’re golden.
You’ve Got This
So there it is β pull the parts, hunt down that filter funk, wipe the hidden spots, and run a hot vinegar cycle. Four moves between you and a dishwasher that smells fresh and actually cleans again.
So yeah, if you’ve been sleeping on this, now’s the time to wake up and give it a shot. Trust me β you’ll thank yourself the next time you unload a rack of spotless, fresh-smelling dishes. π
What do you think β is your filter about to horrify you? Go find out!
_______________________________________________
